Linksys – WRT400N – Specifications

Product specifications
Linksys WRT400N
Standards Draft 802.11n, 802.11a, 802.11g, 802.11b, 802.3, 802.3u
Ports Power, Ethernet, Internet
Buttons Reset, Wi-Fi Protected Setup
LEDs Power, Internet, Wireless, Wi-Fi Protected Setup, Ethernet (1-4)
Number of antennas 4 Total, 2 Internal Antennas per Each 2.4 GHz & 5 GHz Radio Band
Modulations 802.11b: CCK, QPSK, BPSK; 802.11g: OFDM; 802.11a: OFDM; Wireless-N: BPSK, QPSK, 16-QAM, 64-QAM
Streams Two Spatial Streams for Transmitting and Receiving in 2.4 GHz Radio Band
Two Spatial Streams for Transmitting and Receiving in 5 GHz Radio Band
Receive sensitivity 2,4 GHz:
11Mbps: -88 dBm @ Typical
54Mbps: -72 dBm @ Typical
MCS15 (20MHz): -68 dBm @ Typical
MCS15 (40MHz): -65 dBm @ Typical
5 GHz:
54Mbps: -72 dBm @ Typical
MCS15 (20MHz): -68 dBm @ Typical
MCS15 (40MHz): -65 dBm @ Typical
Antenna gain in dBi 2,4 GHz:
RIFA 1 <= 1.3 dBi (Typical)
RIFA 2 <= 3.5 dBi (Typical)
5GHZ:
RIFA 1 <= 3.85 dBi (Typical)
RIFA 2 <= 3.04 dBi (Typical)
uPnP Supported
Security features WEP, WPA, WPA2
WEP key bits Up to 128-Bit Encryption

SOURCE Linksys by Cisco

Advertisements

Tags: , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: